Cinder blocks + wooden 4x4 posts would be the basis for this scene. And rope.
Two posts would be horizontal to the model running the length of the body on each side, held in place by cinderblocks on their side (so both holes are open to either side, but even with each other and on the ground. They will be used to hold a cinderblock on each side, with the post going through the outer hole in the cinder blocks, and the legs of the kneeling (but legs spread) model going through the inner holes just above or below knees, ankles tied column tie to the wood posts.
Perpendicular to the model at waist level, are two standing cinder blocks (holes make an 8) and a post goes through the upper holes, making a beam the model is leaning over.
Same block and post position for shoulder level, but model is leaning under this beam. Chest tied xharness style to it, arms spread outward and column tied to the beam as well.
Would cost less than $50, could be done on a tarp or cheap blanket in the garage, could cover garage windows with a light colored fabric to still allow natural light. Would need to clean the garage and wait for warm weather but I’d love to make this idea happen.
No comments:
Post a Comment